Grader Maintenance Training
Keep your motor grader cutting clean, true grades shift after shift. This online Grader Maintenance Training walks operators and shop crews through preventive servicing of the moldboard, circle, tandem drives, and hydraulics - so blades stay sharp, downtime drops, and every machine earns its keep on the road build.
| 2–5 seats | 5% OFF $113.95/seat |
| 6–20 seats | 10% OFF $107.96/seat |
| 21–50 seats | 15% OFF $101.96/seat |
| 51+ seats | 20% OFF $95.96/seat |
Discount applied automatically based on number of seats.
Course Overview
After completing this course you'll understand:
- Perform a thorough pre-use inspection
- Service the circle drive and drawbar
- Check tandem drive oil and chains
- Replace worn cutting edges and end bits
- Grease all pins and lift cylinders
- Inspect the hydraulic system for leaks
About this course
Our Grader Maintenance Training Online equips operators, technicians, and safety managers with the essential preventive maintenance knowledge, inspection procedures, and heavy machinery grader repair course techniques needed to keep your grader fleet operating safely, reliably, and at peak performance across road construction, land grading, and civil infrastructure environments.
What You Will Learn:
- Grader Preventive Maintenance Best Practices
- Identifying & Controlling Heavy Machinery Safety Hazards
- Pre-Use and Routine Inspection Procedures
- Heavy Machinery Grader Repair Techniques to Extend Equipment Lifespan
A motor grader is a precision finishing machine, and it only holds a true grade when its wearing parts and hydraulics are kept in shape. This Grader Maintenance Training teaches the preventive servicing that keeps the moldboard cutting flat, the circle turning smoothly, and the tandem drives delivering power - covering pre-use inspections, lubrication, fluid checks, and wear-part replacement from front frame to rear tandems.
The course is designed for grader operators, equipment maintenance technicians, shop foremen, and crews in road construction, municipal road maintenance, snow and grade work, mining haul roads, and site development. Whether you run a single machine or maintain a mixed fleet, it gives you a consistent servicing routine the whole crew can follow.
Backed by Canadian safety and OHS framing, the training reinforces lockout/tagout, safe servicing around stored hydraulic pressure, and disciplined pre-shift inspection - so maintenance work itself is done safely and your grader stays road-ready in every season.
What you'll learn
Course Content
1 lesson- Grader Maintenance Procedures
What you'll get
Grader-specific maintenance walkthroughs
Step-by-step modules built around the motor grader - moldboard, circle, scarifier, ripper, and tandems - not generic heavy-equipment filler.
Daily and scheduled service checklists
Downloadable pre-use and interval checklists you can hand to operators so nothing on the grease chart gets skipped.
Wear-part troubleshooting guidance
Learn to read cutting-edge, end-bit, and circle-shoe wear early so you replace parts on your schedule, not mid-job.
Self-paced online access
Train in the shop or the cab on any device, pause and resume around your workload, and revisit modules anytime.
Certificate of completion
Document training for your safety program, contractor pre-qualification, and maintenance records.
Built for Canadian worksites
Servicing practices framed for cold-weather operation, road-build conditions, and provincial OHS expectations.
Why choose us
Equipment Tutor builds training for the machines you actually run. Our Grader Maintenance Training was written around the motor grader's real failure points - sloppy circles, stretched tandem chains, leaking lift cylinders, and chewed-up cutting edges - so the lessons translate straight to the shop floor.
Every module is taught in plain language by people who know the difference between a moldboard and a drawbar. The result is fewer unplanned breakdowns, longer component life, and operators who catch small problems before they shut down a grade.
Student reviews
Finally training built for graders
Most courses lump all the heavy iron together. This one actually digs into the circle, drawbar, and tandems. My new hires went from guessing to following a real service checklist.
Dwayne M. · Jun 17, 2026
Cut our cutting-edge surprises
The wear-part section paid for itself. We started catching worn end bits and edges before they wrecked the moldboard. Less scrambling for parts mid-job.
Carla T. · Jun 17, 2026
Solid refresher for the shop
Clear, practical, and easy to work through between service calls. Would have liked a few more cold-weather tips, but the lubrication and hydraulic sections were bang on for our road crew.
Brett L. · Jun 17, 2026
Frequently asked questions
Who is this Grader Maintenance Training for?
It is built for motor grader operators, maintenance technicians, and shop supervisors who service graders in road construction, municipal, mining, or site-development work. No advanced mechanical background is needed - the course starts with the fundamentals and builds up.
Does this course certify me to operate a grader?
No. This is a maintenance and servicing course, not an operator competency or licensing program. It teaches you how to inspect and maintain the machine. If you also need operating credentials, look at our grader and heavy-equipment operator safety courses.
How long do I have access and can I go at my own pace?
The training is fully online and self-paced. You can start, pause, and resume on any device and revisit the modules whenever you need a refresher during a service interval.
Will this help reduce downtime on my fleet?
Yes. The whole point is preventive maintenance - spotting worn cutting edges, low tandem oil, hydraulic leaks, and loose circle wear shoes before they become breakdowns. Catching issues early keeps machines on the grade and lowers repair costs.
Still have questions?
Our team is happy to help you choose the right training.
Are you looking to train yourself or your team?
Gain access to our easy-to-use platform
Not tech-savvy? No problem. Anyone with an internet connection can access the training and earn a certificate.
No scheduling required
Complete the training in your own time — start, pause and resume whenever it suits you.
Get certified
On completion you can instantly download and print your certificate.
How to get started
Add the course to your cart, check out, and start learning right away.
Buy seats in bulk
Purchase multiple seats at discounted bulk pricing — see the price table above.
Assign to your crew
Invite team members and assign seats from your dashboard in a few clicks.
Track progress
Monitor every learner's progress and completions in one place.
Manage certificates
Access and download your whole team's certificates anytime.
Trusted by workplaces across Canada
Related products
Equipment Maintenance
Articulating Dump Truck Maintenance Training
Get certified with our Articulating Dump Truck Maintenance Training Online. Learn preventive care, safety, and inspections. Fast, flexible,...
Equipment Maintenance
Backhoe Maintenance Training
Our Backhoe Maintenance Training Online delivers the foundational knowledge required to perform effective preventive maintenance on backhoe...
Equipment Operator
Excavator Operator Safety Training
Our Excavator Operator Safety Training delivers the essential skills and technical knowledge needed to operate excavators safely and product...